Question 1

Qual é o código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:? Em qual classificação HS ele se enquadra?

Accepted Answer

O código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: é 7211130000. Este produto está classificado em: Seção 15, Capítulo 72 (se aplicável, caso contrário não exibido), Posição 7211 (se aplicável, caso contrário não exibido). Este código é usado no comércio internacional para a classificação padronizada e declaração aduaneira de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:.

Question 2

Quais são a taxa de IVA de importação e a taxa de reembolso de exportação para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:?

Accepted Answer

A taxa de IVA de importação e a taxa de reembolso fiscal de exportação para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: dependem do código HS específico, da categoria do produto e das políticas tarifárias alfandegárias mais recentes. Em geral, as taxas de IVA de importação podem ser de 13% ou 9%, enquanto as taxas de reembolso fiscal de exportação podem variar entre 0%, 9% e 13%. Diferentes produtos estão sujeitos a diferentes regulamentações fiscais e políticas de reembolso. Consulte as informações mais recentes divulgadas pelas autoridades alfandegárias e fiscais.

Question 3

O código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: é o mesmo em diferentes países?

Accepted Answer

O código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: com base no sistema internacional padronizado é 7211130000, mas alguns países podem utilizar extensões de sufixo diferentes. Recomenda-se confirmar de acordo com as regulamentações aduaneiras do país de destino.

Question 4

Como confirmar se Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: corresponde ao código HS correto?

Accepted Answer

Isso pode ser verificado analisando a função, o material e o uso de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:, e confirmando se o código HS correspondente está de acordo com as regras reais de classificação. Se necessário, também é possível consultar diretrizes oficiais de classificação ou casos históricos de declaração para validação.

Question 5

Como são calculados os impostos e tarifas para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:?

Accepted Answer

Os impostos e tarifas para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: normalmente incluem direitos aduaneiros, imposto sobre valor agregado e outras taxas adicionais. O valor exato depende do valor declarado e das políticas do país importador.

Question 6

O que acontece se o código HS 7211130000 de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: for declarado como outro código HS?

Accepted Answer

Se Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: (Código HS: 7211130000) for declarado incorretamente, isso poderá resultar em atrasos no desembaraço aduaneiro, ajustes fiscais ou riscos de conformidade. Recomenda-se corrigir a declaração o mais rápido possível ou entrar em contato com o prestador de serviços aduaneiros. Plataformas como a XTransfer também podem fornecer suporte de declaração e controle de risco para ajudar a reduzir riscos.

Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:

Detalhamento da estrutura do código HS

Código HS 7211130000 para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:

Wiki do produto

Parceiros

Nossas licenças

HS Code FAQ

Nível	Código	Descrição
Seção	15	BASE METALS AND ARTICLES OF BASE METAL
Capítulo	72	Iron and steel
Posição	7211	Flat-rolled products of iron or non-alloy steel
Subposição	721113	Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:
Mercadoria	7211130000	Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: