XTransfer
  • Products & Services
  • About Us
  • Help & Support
English
Create account

Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2

HS Code: 7208539000

SECTION 15

BASE METALS AND ARTICLES OF BASE METAL

CHAPTER 72

Iron and steel

HEADING 7208

Flat-rolled products of iron or non-alloy steel of a width of 600 mm or more

HS Code Structure Breakdown

LevelCodeDescription
Section15BASE METALS AND ARTICLES OF BASE METAL
Chapter72Iron and steel
Heading7208Flat-rolled products of iron or non-alloy steel of a width of 600 mm or more
Subheading720853Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2
Commodity7208539000Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2
Advertisement banner

Pay and get paid in local currency. Save up to 80% on your currency exchanges.

Get it for free now

HS Code 7208539000 for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2

Product Wiki

Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 has a clear classification code under the Harmonized Commodity Description and Coding System (HS Code), serving as an essential basis for customs authorities worldwide to conduct trade statistics and levy tariffs.

Cross-border trade data shows that China holds a non-negligible market share in the manufacturing and export supply of Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2, with its export volume maintaining a high level over the long term.

Governments and industry associations worldwide usually set different market access standards, quality certifications, and environmental requirements for the import and export of Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2.

With technological advancements and the diversification of market demands, the scope of application for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 continues to expand, driving the development of related industries.

Currently, the global supply-demand balance of Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 is profoundly affected by macroeconomic fluctuations and geopolitics, with market prices and trade flows exhibiting cyclical variations.

Partner

OCBC
DBS
BANK OF CHINA

Our licenses

China

China

HK MSO License

HK MSO License

Singapore

Singapore

UK API License

UK API License

Netherlands

Netherlands

US MSB

US MSB

CA MSB

CA MSB

AU RSP

AU RSP

HS Code FAQ

What is the HS code for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2? Which HS classification does it belong to?

The HS code for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 is 7208539000. This product is classified under: Section 15, Chapter 72 (if applicable, otherwise not shown), Heading 7208 (if applicable, otherwise not shown). This code is used in international trade for the standardized classification and customs declaration of Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2.

What are the import VAT rate and export tax rebate rate for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2?

The import VAT rate and export tax rebate rate for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 depend on its specific HS Code, product category, and the latest customs tariff policies. In general, import VAT rates may fall under different brackets such as 13% or 9%, while export tax rebate rates may vary between 0%, 9%, and 13%. Different products are subject to different tax regulations and rebate policies. Please refer to the latest information released by customs and tax authorities for the most accurate rates.

Is the HS code for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 the same across different countries?

The HS code for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 under the internationally standardized HS coding system is 7208539000, but some countries may use different suffix extensions. It is recommended to confirm based on the customs regulations of the destination country.

How can I confirm whether Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 corresponds to the correct HS code?

You can determine this by checking the function, material, and usage of Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2, and verifying whether the corresponding HS code matches the actual classification rules. If necessary, official classification guidelines or historical declaration cases can also be referenced for validation.

How are the taxes and duties for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 calculated?

The taxes and duties for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 usually consist of customs duties, value-added tax , and other additional charges. The exact amount depends on the declared value and the import policies of the destination country.

What happens if the HS code 7208539000 for Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 is declared as a different HS code?

If Flat-rolled products of iron or non-alloy steel, in coils,of a thickness exceeding 3mm but not exceeding 4.75mm ,of a width of 6 mm or more,of a yield strength less than 355N/ mm2 (HS Code: 7208539000) is declared incorrectly, it may result in customs clearance delays, tax adjustments, or compliance risks. It is recommended to correct the declaration as soon as possible or contact the customs clearance service provider for assistance. Platforms such as XTransfer can also provide declaration and risk control support to help reduce risks.