XTransfer
  • Produits et services
  • À propos de nous
  • Centre d'aide
Français
Registre

Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o

Code HS: 7219131200

SECTION 15

BASE METALS AND ARTICLES OF BASE METAL

CHAPITRE 72

Iron and steel

POSITION 7219

Flat-rolled products of stainless steel

Décomposition de la structure du code HS

NiveauCodeDescription
Section15BASE METALS AND ARTICLES OF BASE METAL
Chapitre72Iron and steel
Position7219Flat-rolled products of stainless steel
Sous-position721913Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o
Marchandise7219131200Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o
Advertisement banner

Payez et recevez des paiements en monnaie locale. Économisez jusqu'à 80 % sur vos échanges de devises.

Obtenez-le gratuitement maintenant

Code HS 7219131200 pour Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o

Wiki produit

Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o possède un code de classification clair dans le Système harmonisé (Code SH), constituant une base essentielle pour les autorités douanières du monde entier pour l'établissement des statistiques commerciales et la perception des tarifs douaniers.

Les données du commerce transnational montrent que la Chine détient une part de marché non négligeable dans la fabrication et l'approvisionnement à l'exportation de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o, le volume de ses exportations se maintenant à un niveau élevé sur le long terme.

Les gouvernements et les associations sectorielles du monde entier établissent généralement des normes d'accès au marché, des certifications de qualité et des exigences environnementales différentes pour l'importation et l'exportation de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o.

Avec les progrès technologiques et la diversification des demandes du marché, le champ d'application de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o ne cesse de s'élargir, stimulant ainsi le développement des industries connexes.

Actuellement, l'équilibre mondial entre l'offre et la demande de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o est profondément affecté par les fluctuations macroéconomiques et la géopolitique, les prix du marché et les flux commerciaux affichant des variations cycliques.

Partenaires

OCBC
DBS
BANK OF CHINA

Nos licences

Chine

Chine

Licence MSO HK

Licence MSO HK

Singapour

Singapour

Licence API UK

Licence API UK

Pays-Bas

Pays-Bas

US MSB

US MSB

CA MSB

CA MSB

AU RSP

AU RSP

HS Code FAQ

Quel est le code HS de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o ? À quelle classification HS appartient-il ?

Le code HS de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o est 7219131200. Ce produit est classé sous : section 15, chapitre 72 (si applicable, sinon non affiché), position 7219 (si applicable, sinon non affiché). Ce code est utilisé dans le commerce international pour la classification standardisée et la déclaration en douane de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o.

Quels sont le taux de TVA à l’importation et le taux de remboursement à l’exportation pour Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o ?

Le taux de TVA à l'importation et le taux de remboursement de taxe à l'exportation pour Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o dépendent du code HS spécifique du produit, de sa catégorie et des dernières politiques tarifaires douanières. En général, les taux de TVA à l'importation peuvent être de 13 % ou 9 %, tandis que les taux de remboursement de taxe à l'exportation peuvent varier entre 0 %, 9 % et 13 %. Les différents produits sont soumis à des réglementations fiscales et politiques de remboursement différentes. Veuillez consulter les informations les plus récentes publiées par les autorités douanières et fiscales.

Le code HS de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o est-il le même dans différents pays ?

Le code HS de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o selon le système international harmonisé est 7219131200, mais certains pays peuvent utiliser des extensions de suffixe différentes. Il est recommandé de vérifier selon les réglementations douanières du pays de destination.

Comment confirmer si Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o correspond au bon code HS ?

Vous pouvez le vérifier en examinant la fonction, le matériau et l’usage de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o, puis en confirmant si le code HS correspondant est conforme aux règles réelles de classification. Si nécessaire, vous pouvez également vous référer aux directives officielles de classification ou à des cas historiques de déclaration pour validation.

Comment les taxes et droits pour Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o sont-ils calculés ?

Les taxes et droits applicables à Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o comprennent généralement les droits de douane, la taxe sur la valeur ajoutée et d’autres frais supplémentaires. Le montant exact dépend de la valeur déclarée et des politiques du pays importateur.

Que se passe-t-il si le code HS 7219131200 de Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o est déclaré sous un autre code HS ?

Si Rolled products of stainless steel, of a thickness of 3mm or more but not exceeding 4.75mm, containing more than 5.5% by weight of manganese of Ferro-chromium-manganese steel (not further worked than hot-rolled ,hot-drawn or extruded,of a width of 6mm o (code HS : 7219131200) est déclaré incorrectement, cela peut entraîner des retards de dédouanement, des ajustements fiscaux ou des risques de conformité. Il est recommandé de corriger la déclaration dès que possible ou de contacter un prestataire de dédouanement pour assistance. Des plateformes comme XTransfer peuvent également fournir un support en matière de déclaration et de gestion des risques afin de réduire les risques.