Question 1

¿Cuál es el código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:? ¿A qué clasificación HS pertenece?

Accepted Answer

El código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: es 7211130000. Este producto está clasificado en: sección 15, capítulo 72 (si aplica, de lo contrario no se muestra), partida 7211 (si aplica, de lo contrario no se muestra). Este código se utiliza en el comercio internacional para la clasificación estandarizada y la declaración aduanera de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:.

Question 2

¿Cuál es la tasa de IVA de importación y la tasa de devolución de impuestos a la exportación para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:?

Accepted Answer

La tasa de IVA de importación y la tasa de devolución de impuestos a la exportación de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: dependen de su código HS específico, la categoría del producto y las políticas arancelarias más recientes. En general, las tasas de IVA de importación pueden ser del 13 % o 9 %, mientras que las tasas de devolución de impuestos a la exportación pueden variar entre 0 %, 9 % y 13 %. Los distintos productos están sujetos a diferentes regulaciones fiscales y políticas de devolución. Consulte la información más reciente publicada por las autoridades aduaneras y fiscales.

Question 3

¿El código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: es el mismo en diferentes países?

Accepted Answer

El código HS de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: según el sistema internacional armonizado es 7211130000, pero algunos países pueden utilizar extensiones de sufijo diferentes. Se recomienda confirmar según las regulaciones aduaneras del país de destino.

Question 4

¿Cómo confirmar si Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: corresponde al código HS correcto?

Accepted Answer

Puede determinarse verificando la función, el material y el uso de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:, y comprobando si el código HS correspondiente coincide con las reglas reales de clasificación. Si es necesario, también pueden consultarse las directrices oficiales de clasificación o casos históricos de declaración para su validación.

Question 5

¿Cómo se calculan los impuestos y aranceles para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:?

Accepted Answer

Los impuestos y aranceles para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: suelen incluir derechos de aduana, IVA  y otros cargos adicionales. El importe exacto depende del valor declarado y de las políticas del país importador.

Question 6

¿Qué sucede si el código HS 7211130000 de Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: se declara como otro código HS?

Accepted Answer

Si Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: (Código HS: 7211130000) se declara incorrectamente, puede ocasionar retrasos en el despacho aduanero, ajustes fiscales o riesgos de cumplimiento. Se recomienda corregir la declaración lo antes posible o contactar al proveedor de servicios de despacho aduanero. Plataformas como XTransfer también pueden proporcionar soporte de declaración y control de riesgos para reducir riesgos.

Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:

Desglose de la estructura del código HS

Código HS 7211130000 para Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:

Wiki del producto

Socios

Nuestras licencias

HS Code FAQ

Nivel	Código	Descripción
Sección	15	BASE METALS AND ARTICLES OF BASE METAL
Capítulo	72	Iron and steel
Partida	7211	Flat-rolled products of iron or non-alloy steel
Subpartida	721113	Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated:
Mercancía	7211130000	Flat-rolled products of iron or non-alloy steel, rolled on four faces or in a closed box pass, of a width exceeding 150mm but not exceeding 600mm and a thickness of not less than 4mm, not in coils and without patterns in relief,not clad, plated or coated: